An abstract form shows flowing real-time congestion data and layered historical records converging into multiple paths: one leads to a smooth arrival zone, while another leads to a longer queue.
Data and Integrationsthrough Where the Cost Fell Away

How to Build Arrival Recommendations from Free Port Congestion Data

A new route to free real-time congestion data and historical records means even small carriers can run terminal-arrival recommendations and delay alerts.

Published 2026. 11. 13.

Port status is now machine-readable

In March 2026, the Incheon Port Authority (인천항만공사), which operates and develops Incheon Port in Korea, registered a new terminal congestion lookup service on the Public Data Portal (공공데이터포털), Korea’s government platform for public datasets. It is an interface that lets another service automatically retrieve information by sending requests to a set address. The authority says use is free and the information is updated in real time.

The Incheon Port Container Integrated Information screen lists Sun Kwang New Container Terminal, Hanjin Incheon Container Terminal, E1 Container Terminal, Incheon Container Terminal, and the International Passenger Pier. For each location, it shows a smooth, normal, or congested status, along with the number of vehicles handling inbound and outbound cargo, processing time, and the number of waiting vehicles.

Colour alone does not show the real waiting burden on drivers. On the evening display of November 12, 2026, all five locations were marked smooth, but outbound processing time at E1 Container Terminal and Incheon Container Terminal was 23 minutes at each terminal.

Even a few minutes add up across a day’s dispatches. The Incheon Port Authority said that average truck gate-in and gate-out time across all terminals fell by 1.6 minutes, from 18.4 minutes to 16.8 minutes in 2025. This is the time from when a vehicle enters a terminal until it leaves after loading cargo.

The public specification for the new interface does not say whether new values are generated every minute, whether the previous seven days can be queried directly, or exactly when the old address will stop operating. However, the Incheon Port Authority separately provided about one year of historical congestion data to a private service in 2026. For data that is not publicly available, it reviews requests before deciding whether to provide it; the stated processing period is 10 days.

The cost that has fallen here is the cost of reading the status. For example, if an employee checks five terminals every 30 minutes during an eight-hour shift, they must read 80 screens a day. With the free interface, a computer can do that work within the permitted number of requests.

Continuously checking terminal screens and building a record can create a staffing burden for a small carrier. Now, it can begin with a small dispatch tool that combines free current data with a request for historical records.

How a 12-person carrier’s day could change

Assume an Incheon container transport company with 12 employees and a dispatch coordinator, Mr. Kim. In the morning, Mr. Kim organises today’s inbound and outbound jobs in Excel, opens each terminal screen, and tells drivers their departure time by phone or group chat.

When a driver calls after departing to say that the queue is long, Mr. Kim opens the same screen again. He writes down the congestion colour, waiting-vehicle count, inbound time, and outbound time, then decides whether to delay the next dispatch. But changes at other terminals can be missed in the meantime.

After an automated connection is in place, the system stores terminal name, measurement time, inbound time, outbound time, number of working vehicles, and number of waiting vehicles at regular intervals. Whether a one-minute interval can be promised must be confirmed by the Incheon Port Authority. At first, collection should follow the official update interval and permitted request volume.

Mr. Kim’s first screen groups today’s dispatches by terminal. Next to each dispatch, it shows current inbound and outbound time and the recent direction of change. If historical records are available, it can also show periods that often took longer on the same day of the week and at the same time.

Alert rules do not need to be complicated at the start. If current processing time exceeds a company-defined threshold or becomes longer several times in a row, send a message that makes the action clear: “depart now,” “check again in 20 minutes,” or “dispatcher decision required.”

Do not make drivers keep watching a screen while driving. Send alerts by text message or the work chat already in use at set moments, such as before departure and immediately after loading is complete. If the driver is already on the road, the dispatcher decides whether a change is needed and communicates it.

Delay notices to shippers also change. Instead of the vague answer, “the port is congested,” the carrier can say, “as of 2:10 p.m., outbound time rose from 12 minutes to 24 minutes, delaying the expected arrival,” with a measurement time and the change attached.

Some work still stays with people. A single congestion number cannot determine whether a container is actually ready, whether there is a gate-in or gate-out restriction notice, or whether equipment failures or nearby road congestion have occurred.

The boundaries behind congestion grades are also not shown as specific numbers on the public screen. Rather than redefining smooth, normal, and congested internally, show inbound and outbound time and waiting-vehicle counts separately. When a recommendation is wrong, let the dispatcher record why.

If historical records are essential to the service, secure them before signing a development contract. Assuming values from five terminals are collected every minute for seven days, there could be up to 50,400 time-stamped records. But the actual storage interval and method for handling missing data must follow the Incheon Port Authority’s response.

Overseas ports combined appointments with advance checks

GCT Bayonne at the Port of New York and New Jersey in the United States first applied truck arrival appointments to work between 6 a.m. and 8 a.m. in 2017. It later extended the covered period to 1 p.m. on weekdays. The United States Environmental Protection Agency says truck turn times during appointment periods improved by more than 40%.

More than 70% of all truck moves used appointments, and appointment compliance exceeded 90%. The United States Environmental Protection Agency estimated annual fuel-cost savings at US$5.3 million, or about KRW 7.69 billion using the comparison exchange rate in the source. The important point is that the system did not mandate appointments for every time slot from the beginning; it started with a narrow window.

Since 2021, RST Terminal in Rotterdam, the Netherlands, has required trucking companies to submit visit information in advance through HCN Road from Portbase, a Dutch port-community system. It checks whether customs documents and cargo status are in order before arrival, and gives eligible vehicles a number used for entry.

Portbase said terminal visits by trucks that completed accurate advance notification were more than 20 minutes faster on average. This was not simply a recommendation to visit at a less busy time. It came from checking whether the cargo was ready before arrival, showing what could follow congestion alerts in an Incheon Port service.

Four things you can build now

1. A departure-time recommendation board

  • What it does: Combines today’s dispatches with processing time by terminal to suggest a good departure time for each driver.
  • Who uses it: Dispatch coordinators at small and medium-sized container carriers that schedule daily Incheon Port gate-in and gate-out trips but do not have dedicated control software.
  • Why now: They can automatically retrieve free current information, and there is now a precedent for separately requesting historical data.
  • First screen: Lists today’s dispatches in time order and shows current gate-in or gate-out time, recommended departure time, and the time to check again next to each job.

2. Driver waiting alerts

  • What it does: Sends drivers terminal status before departure and asks the dispatcher to decide on changes when processing time becomes longer.
  • Who uses it: Independent freight-truck drivers travelling to and from Incheon Port for multiple carriers, and freight brokers who assign work to those drivers.
  • Why now: Instead of repeatedly watching five terminal screens, the system can automatically attach the measurement time and processing time.
  • First screen: Prominently shows the selected terminal’s current inbound and outbound time, plus one of three instructions: “depart,” “wait briefly,” or “call the dispatcher.”

3. A shipper delay explainer

  • What it does: Automatically creates a notice that includes the measurement time and the change in processing time when a port delay occurs.
  • Who uses it: Customer-service staff at small freight forwarders who must keep stores or factories informed about import-container arrival times.
  • Why now: Before calling drivers to ask what is happening, staff can attach terminal figures that provide a shared reference point.
  • First screen: Shows shipment number, scheduled arrival time, current delay time, basis for the delay, and a preview of the message to send the customer.

4. A warehouse receiving-time adjustment board

  • What it does: Reorders warehouse unloading sequence and expected receiving times as port outbound time changes.
  • Who uses it: Warehouses in the Seoul metropolitan area that receive several import containers from Incheon Port each day but have only one or two receiving staff.
  • Why now: It can reduce phone calls and re-entry of information that happen before port changes reach the warehouse schedule.
  • First screen: Shows today’s arriving vehicles in time order and separately groups jobs with a high likelihood of port delay near the top.

Why this matters where you are

This is a Korean case shaped by a free public-data interface from the Incheon Port Authority and the authority’s process for considering requests for non-public historical data. In your own market, check whether terminals publish machine-readable current data, what request limits apply, and whether historical records can be obtained. The availability of data, terminal rules, and appointment systems may differ, but a small tool can still begin by turning measured terminal changes into a clear dispatch action.

One call to make today

Call 032-890-8254, the Incheon Port Authority’s public-data operations contact, and ask: “Please tell me the actual interval at which records are generated in the new congestion interface, whether the previous seven days can be queried, the daily request limit, and the end date for the old address.” If one request can return all target terminals and their measurement times, and the permitted request volume is sufficient to operate at the official update interval, the departure-time recommendation board is worth building first.

Sources

7 sources

Every fact in this article came from the pages below. Check them yourself.

How to Build Arrival Recommendations from Free Port Congestion Data | Prometheon