A four-stage diagram shows scattered hazards converging in one place, moving through an improvement request, being checked again, and then organised into a document bundle.
Industries Going Digitalthrough Unbundling

A Service for Recording Risk Assessment Improvements and Follow-Up Checks Is Opening Up

If a comprehensive safety-management programme is reduced to “find a risk → request an improvement → verify it again → assemble submission materials,” it becomes a small record-keeping service that manufacturing and maintenance businesses with 5 to 30 employees can buy immediately.

Published 2026. 11. 10.

The improvement process now matters more than filling out forms

On November 4, 2026, the Ministry of Employment and Labor (고용노동부), Korea’s labour ministry, fully revised the Guidelines on Workplace Risk Assessment (사업장 위험성평가에 관한 지침). Risk assessment is the process of finding in advance what could injure or make people ill at work, then deciding and carrying out ways to reduce those risks.

An initial assessment must be completed before work begins. The relevant work must also be reviewed again before it starts or resumes when equipment or work methods change, or when an accident creates an expectation of new risks. New hires and employees whose work has changed must be told the relevant assessment results before they begin work.

The participation of on-site employees has also become more specific. Workers performing the relevant task must take part in four stages: finding risk factors, determining the level of risk, planning improvements, and checking after improvements are made. In principle, this means walking through and reviewing the site together, with methods such as surveys or interviews added when needed.

Records must include when and by whom an assessment was conducted, which employees participated, what was judged to be a risk, and which improvements were carried out. Records must be retained for three years. This is no longer a matter of completing a single sheet of paper; it is a matter of managing a history from discovery through follow-up verification.

Administrative fines are scheduled to apply from January 1, 2027 for workplaces with 50 or more employees, and from January 1, 2028 for workplaces with fewer than 50 employees. The guidance states that failing to conduct an assessment can lead to a fine of up to KRW 10 million; missing participation or sharing procedures, up to KRW 5 million; and missing records or retention, up to KRW 3 million. These are not small amounts for a small business that loses a single paper file.

What happens at a 12-person metalworking business

Consider the owner of a metalworking business with 12 employees. A foreman writes down risks around cutting machines and presses on a paper checklist. Photos of faults go into a group messenger chat. A request to repair a machine guard goes into a spreadsheet, while the photo showing that work was completed may remain on the phone of an employee at the equipment supplier.

One risk is split across several places. The paper record has the date it was found, the messenger chat has the photos, and the spreadsheet has the person responsible and the due date. Whether the area was safe again a month later depends on the foreman’s memory. When an inspection takes place, the owner or administrator has to gather the material again.

Meeting the revised procedure requires more than moving a checklist onto a phone screen. Legally required records must include the timing and person responsible for the assessment, participants, the risk factors and risk determination, and improvement measures and implementation results. Connecting the person responsible, deadline, and before-and-after photos to one item is a recommended management design. New hires and workers whose tasks have changed must receive the relevant assessment results before work starts. Connecting proof of that sharing to the same risk item is a recommended service-design choice.

Safety-management platforms in public case studies offer inspection, corrective action, analysis, assets, training, and other functions together. Large companies needed to manage multiple factories and many users in a consistent way, and they reused the same site information and employee lists across several types of work. They also had dedicated staff to handle purchasing and operations, which made bundled sales possible.

But this bundle is too large for a 12-person business. What it needs is not a huge safety-management system, but a small record book in which “risk found → improvement requested → completion verified → follow-up check” does not break. This change has made the flow that must be recorded—participants, the timing of sharing, and improvement results—more specific. That creates a reason to sell this one piece separately.

The workflow should be small too. On a phone, a worker selects the process and equipment, then leaves one photo and a voice explanation. The foreman assigns an owner and completion date. When the repair is complete, they attach a photo from the same location and the result of an operational check.

Some judgement must still remain with people. A photo alone cannot determine whether risk has been reduced enough, and people need to observe on site whether a safety guard causes workers to bypass the intended procedure. Photos and signatures are supporting materials that can show participation and implementation, rather than statutory documents required uniformly for every case. A service should not claim that it replaces safety judgement.

Outside Korea, the connection is the follow-up, not just the inspection

Mowi Consumer Products UK, a salmon-processing and packaging plant in Scotland, replaced paper quality and safety records with mobile checklists in SafetyCulture’s field-management service. It recorded issues such as exposed wiring as Issues to be managed as follow-up actions.

The plant started with quality and food-safety records, then expanded to shift reports, delivery photos, and foreign-material reports. The supplier said monthly inspections rose from 3,000 to more than 7,000—more than doubling—and paper use fell by about 90%. Those figures require separate verification.

Thermosash Group, a New Zealand manufacturer and installer of building façade materials, also started with paper quality inspection forms. When inspectors attached photos of defects, corrective work was assigned to a factory manager. Repeated defects were standardised as Issues, creating a feedback flow between the field and managers.

It later expanded to connect documents and training for 660 manufacturing and field employees, as well as management of international certifications for quality, environment, and occupational safety and health. The supplier presents company-wide training and certification obtained within six months as outcomes. The key point, however, is that it started not with a large bundle but with a flow in which a photo led to an owner and a completion check.

Excellerate, a United States electrical-components assembly business, moved paper inspections at five manufacturing facilities to mobile records. Each production manager inspected at least once a week, and every identified issue received an assigned owner and a completion task.

Every two weeks, the safety manager reviewed the ten items that most often failed and set the next improvement order. Accident rates and cost savings were not published. But the ability to check an issue’s location and handling status rather than guessing whether it was complete can transfer directly to small factories.

Four things that can be separated out

1. A before-and-after improvement record

  • What it does: When a risk photo is uploaded, it sets an owner and deadline, then keeps the after-improvement photo and follow-up check result together in one record.
  • Who uses it: Metalworking businesses with 5 to 20 employees that operate cutting machines, presses, and welding equipment but have no dedicated safety manager.
  • Why now: Records that show worker participation and improvement implementation in sequence matter more than simply possessing an assessment form.
  • First screen: Show only three sections: “Register new risk,” “Overdue improvements,” and “Awaiting follow-up check.”

2. A pre-work employee confirmation board

  • What it does: Shows the risks and precautions for today’s work, then lets workers leave a voice comment or question after reading them.
  • Who uses it: Food manufacturers with 10 to 30 employees where new and short-term workers frequently join and operate packaging machines and heating equipment.
  • Why now: New hires and employees whose work has changed must receive relevant assessment results before they begin.
  • First screen: Beside today’s task list, display the statuses “Briefing not given,” “Employee confirmed,” and “Question raised” prominently.

3. Equipment-repair follow-up reminders

  • What it does: When a machine guard or safety sensor repair is completed, it immediately schedules a check and a later follow-up date after actual work has resumed.
  • Who uses it: Maintenance businesses with 5 to 15 employees that visit several customer factories to repair machinery and electrical equipment, together with their customers.
  • Why now: A completion photo alone is not enough; a record is needed to show that the improvement actually works.
  • First screen: Show only the equipment due for follow-up today and incomplete repairs, organised by workplace.

4. An inspection-submission bundle builder

  • What it does: Groups scattered assessment forms, employee comments, before-and-after improvement photos, and sharing records by risk item, then lets users download them as one file.
  • Who uses it: Window-frame and metal-product manufacturers with 20 to 30 employees where risk assessments are done directly but one administrator also handles record organisation.
  • Why now: Records must be retained for three years, and there is more need to present participation and the improvement process as a connected record.
  • First screen: Show record completeness and missing materials by process, with a “Create submission bundle” button.

Today, find just one record

Ask the owner of a metalworking or equipment-maintenance business to find the “discovery photo, worker comment, improvement details, completion date, and follow-up result” for one recently corrected risk within 10 minutes. If the material is spread across three or more places—such as paper files, spreadsheets, and messenger chats—or if the follow-up result cannot be found, it may be worth testing one screen for a before-and-after improvement record before building all four functions.

Why this matters where you are

Korea’s revised risk-assessment guidance, record-retention requirement, and planned administrative fines are Korean conditions. The underlying operational problem may still be worth checking in your market: whether one risk is split across photos, messages, spreadsheets, and paper files, and whether anyone can prove that a repair was checked after work resumed. Start by testing the smallest flow that links a finding to an owner, completion evidence, and a follow-up check.

Sources

6 sources

Every fact in this article came from the pages below. Check them yourself.

A Service for Recording Risk Assessment Improvements and Follow-Up Checks Is Opening Up | Prometheon